|Enterprise Wireless Access Point
|Brand Model Number:
|Dual Frequency (2.4GHz, 5GHz)
|1 100/1000/2500 MGig (RJ-45) Interface - IEEE 802.3bz Management Console Port (RJ-45)
gigabit wireless ap wifi 6,
cisco c9120axi-h gigabit wireless ap,
dual band wireless ap wifi 6
Verified through Wi Fi 6
● Four radio frequency bands: 5 GHz (4x4) flexible radio frequency band, 2.4 GHz or 5 GHz (4x4) radio frequency band, and unified RF engine
● Internet of Things ready (BLE, Zigbee, Thread, and other multi-protocol 802.15.4 devices)**
● OFDMA and MU-MIMO
● Supports multiple gigabits
● Built in and external antennas, as well as external antennas suitable for professional installation
Features and benefits
|The IEEE 802.11ax emerging standard, also known as High-Efficiency-Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. Wi-Fi 6 is designed to use both the 2.4-GHz and 5-GHz bands, unlike the 802.11ac standard.
|Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.
|Supporting four spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.
|Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.
|A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to three to four times greater compared to 802.11n and 802.11ac.
|Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis. The software can track over 240 anomalies and instantaneously review all packets on demand, emulating the onsite network administrator. Intelligent Capture allows for more informed decisions on your wireless networks.
|Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps) over-the-air speeds while increasing client capacity.
|An intelligent second physical antenna connector is included on 9120AX Series access points with an external antenna. This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeterias, and arenas/stadiums, allowing two sets of antennas to be connected and active on a single access point.
|The 9120AX Series Wi-Fi 6 access points is available with a built-in controller. The Cisco Embedded Wireless Controller on Catalyst 9100 Access Points provides an easy-to-deploy and manage option that does not require a physical appliance. The control resides on the access point so there is no added footprint or complexity. And, because it uses Cisco Catalyst 9800 Series code, it’s easy to migrate your network as your needs grow. For more details refer to the EWC data sheet.
|Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.
|Provides uplink speeds of 2.5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.
|Integrated Bluetooth Low Energy 5 radio to enable IoT use cases such as location tracking and wayfinding.
|Enables edge computing capabilities for IoT applications on the host access point.
1. Open the packaging, check the products carefully, and take them gently.
2. The product is a brand new original unopened equipment.
3. All products 3 year warranty, and the buyer is responsible for the return shipping cost.
International Buyers Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges.
We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws.
Customs delays are not the responsibility of the seller.
Inspur NF5270M6/NF5280M5/ NF2180M3/NP5570M5/NF3120M5/NF8480M5
xfusion 2288HV5 2488HV5 5588HV5
Need to contact:
Contact Person: Ms. Sandy Yang
Power Input: DC: 45.6V to 57V PoE power supply: In compliance with IEEE 802.3af/at
Maximum Power Consumption: AP2051DN-E: 11.5W (excluding the output power of the USB port and PoE_OUT port)
Built-in Bluetooth: BLE4.1 (supported by the AP2051DN-E)
PoE OUT: Supported by AP2051DN-E: Maximum 13.6W (802.3at-compliant, 48V DC, supported only by GE4)
Power Input: PoE power supply: In compliance with IEEE 802.3at/bt; only the 2.5G/5G port supports PoE input
Maximum Power Consumption: 802.3bt power supply: 45W (excluding the output power of the PoE OUT port) 802.3at power supply: 25.5W (the PoE OUT function and GE/POE OUT ports are unavailable, 5 GE and SFP are mutually exclusive)
Operating Temperature: –40°C to 65°C
Antenna Type: AP8082DN: Built-in directional antennas (horizontal 60°, vertical 30°) AP8182DN: External antennas (with eight type N connectors)