Corsair MP700 Pro Pricing and Capacities

Backed by a 5-year warranty, the MP700 Pro goes for the following prices from Amazon (affiliate link):

• No heatsink: $180 (1TB)
• No heatsink: $300 (2TB)
• With Air Cooler heatsink: $190 (1TB)
• With Air Cooler heatsink: $325 (2TB)
• With Hydro X Series (water block): $325 (2TB only)

We are looking at the 2TB air cooler model for this review.

Corsair MP700 Pro Specifications

Corsair MP700 Pro Performance

For this review, we will be looking at the 2TB model of the Corsair MP700 Pro. Comparables are a mixture of popular Gen4 SSDs and the Gen5 SSDs equipped with the Phison E26 platform:

• Samsung 990 Pro
• ADATA Legend 970
• Seagate FireCuda 540
• Gigabyte Aorus 12000
• Solidigm P44 Pro

For testing, we use two platforms. The consumer test platform supports PCIe Gen4/Gen5 SSDs and is sometimes leveraged for lighter consumer-based tests such as BlackMagic DiskSpeed Test and CrystalDiskMark, and our main platform, a Dell PowerEdge R760, which overlaps with our enterprise tests. For ultimate flexibility, we worked with Serial Cables, who supplied us with an 8-bay PCIe Gen5 JBOF for U.2/U.3, M.2, and E1.S/E3.S drive testing. This allows us to test all current and emerging drive types on the same test hardware.

Dell PowerEdge R760 Configuration

• Dual Intel Xeon Gold 6430 (32 cores/64 threads, 1.9GHz base)
• 1TB DDR5 RAM
• Ubuntu 22.04

VDBench Workload Analysis

When benchmarking storage devices, application testing is best, and synthetic testing is second. While not a perfect representation of actual workloads, synthetic tests help baseline storage devices with a repeatability factor that makes it easy to compare competing solutions. These workloads offer a range of testing profiles ranging from “four corners” tests and common database transfer size tests to trace captures from different VDI environments.

These tests leverage the common vdBench workload generator, with a scripting engine to automate and capture results over a large compute testing cluster. This allows us to repeat the same workloads across various storage devices, including flash arrays and individual storage devices. Our testing process for these benchmarks fills the entire drive surface with data, then partitions a drive section equal to one percent of the drive capacity to simulate how the drive might respond to application workloads. This differs from full entropy tests, which use 100 percent of the drive and take them to a steady state. As a result, these figures will reflect higher-sustained write speeds.

Profiles:

• 4K Random Read: 100% Read, 128 threads, 0-120% iorate
• 4K Random Write: 100% Write, 64 threads, 0-120% iorate
• 64K Sequential Read: 100% Read, 16 threads, 0-120% iorate
• 64K Sequential Write: 100% Write, 8 threads, 0-120% iorate
• VDI Profiles

Starting with 4K random read, the Corsair MP700 Pro Gen5 drive performed very well, hitting just over a million IOPS at 126ms. The Gen4 Solidigm P44 Pro SSD was the best-performing drive.

The Corsair MP700 Pro SSD faired well when it came to writes, peaking at 255K IOPS at just 80.8ms in latency. The best-performing drive here was by far the Samsung 990 Pro.

When switching to the sequential read 64k workload, the MP700 Pro performed much better, placing 1^st overall among all tested drives. At its peak, it measured 8GB/s read (128K IOPS) with a latency of just a hair under 250ms.

The Corsair MP700 Pro fell back a bit in sequential writes, peaking at 1.37GB/s at a latency of over 681.3µs before taking a slight spike in performance. This placed it 3^rd.

Next, we looked at our VDI benchmarks, designed to tax the drives further. These tests include Boot, Initial Login, and Monday Login. Starting with boot, the MP700 Pro had solid results, peaking at around 205K IOPS at 171.6ms for second among the test drives (just behind the Solidigm P44 Pro).

Next up is VDI Initial Login. However, the Corsair MP700 Pro posted a peak of 65K IOPS at 460ms in latency. Though this was well behind the Samsung 990 Pro in peak performance, the Corsair drive was much more stable.

Lastly, we have the VDI Monday Login benchmark. Taking the top spot, the MP700 Pro peaked at 51K IOPS at a latency of 310.2ms.

BootBench

BOOT-BENCH-1 is a workload profile adopted by OCP to profile SSDs designed for server boot duty. While this is intuitively a job for enterprise SSDs, client SSDs are often selected for their performance, capacity, and cost combination. The boot drive issue is germane not just to hyperscalers but also to server and storage system providers, as they face similar challenges.

This boot workload executes a relatively intense test plan that fills the entire drive with writes before testing a read-heavy workload sequence. For each test, it performs a 32K random read async operation alongside a 15MiB/s synchronous 128k random write and a 5MiB/s synchronous 128k random write/trim background workload. The script starts with the random-read activity at a 4-job level and scales up to 256-jobs at its peak. The final result is the read-operations performed during its peak run.

The OCP goal for this benchmark is a pass/fail at 60K read IOPS. Most drives we test will far exceed the minimum, but the results are instructive regardless.

Here, the Corsair MP700 Pro recorded 51,521.

Current boot leaderboard

CrystalDiskMark Speed Test

We performed a lighter-weight test on the Corsair MP700 Pro to demonstrate its Gen5 speeds. CrystalDiskMark’s higher queue depth (compared to BlackMagic) allows us to showcase the best-case scenario for the drive. That said, any real-world performance differences would likely be negligible.

Here, the drive recorded sequential transfer speeds exceeding 12.4GB/s read and 11.8GB/s write, which were the highest numbers we’ve seen for this test so far.

BlackMagic DiskSpeed Test

Lastly, we measured performance inside a Windows 11 environment on our consumer test platform via the popular Blackmagic test. Here, new Corsair drive was able to hit 7.44GB/s read (higher than the average) and 9.64GB/s write (also higher than the average).

Here’s a quick run-down of how it compares to the other recent Gen5 drives:

Conclusion

Ultimately, the Corsair MP700 Pro distinguishes itself in the marketplace through its exceptional performance and versatile cooling solutions. Available in 1TB and 2TB configurations, this SSD is powered by the Phison PS5026-E26 controller and leverages 3D TLC NAND, striking an ideal balance between performance, durability, and cost-effectiveness. Its most eye-catching visual attribute is an active cooling system housed in a sleek black heatsink—an essential component for sustaining optimal operating temperatures.

 

 

Corsair MP700 Pro top

In terms of performance, the Corsair MP700 Pro delivered strong overall results across most benchmark tests, solidifying its position as a top contender in the Gen5 SSD segment. During 4K random read testing, it achieved over one million IOPS, though—like all other SSDs in that particular test—it was outperformed by the Solidigm P44 Pro Gen4 drive.

 

Its write performance topped out at 255K IOPS with minimal latency. The MP700 Pro shone in sequential read 64k workloads, leading the field with 8GB/s read speeds; however, it dropped to third place in sequential write tests. In VDI benchmarks, it consistently ranked among the top performers, with notable strength in the Monday Login test.

 

CrystalDiskMark tests further highlighted its capabilities, showcasing top-tier sequential transfer speeds that surpass 12GB/s—outperforming many competing models. The BlackMagic DiskSpeed test, conducted in a Windows 11 environment, revealed read and write speeds above the average, underscoring the drive’s reliable performance across diverse testing scenarios.

 

 

Corsair MP700 Pro back

Examining the Corsair MP700 Pro’s pricing alongside other Gen5 SSDs offers valuable context. The MP700 Pro provides multiple options to suit different budgets: the no-heatsink model is priced at $180 for the 1TB variant and $300 for the 2TB version. Opting for the air-cooled heatsink model adds a small premium, with prices at $190 for 1TB and $325 for 2TB. The Hydro X Series water block version, which is only available for the 2TB model, also retails for $325.

 

When compared to other consumer Gen5 SSDs, the GIGABYTE AORUS 12000—complete with a heatsink—comes in at a lower price point: $155 for 1TB and $265 for 2TB. The ADATA Legend 970 is slightly more costly, at $218 for 1TB and $343 for 2TB (both models include heatsinks). The Seagate FireCuda 540 is closely aligned with the MP700 Pro’s no-heatsink pricing, at $180 for 1TB and a marginally higher $308 for the 2TB variant, though it lacks a heatsink. All things considered, the MP700 Pro’s pricing is highly competitive, especially when factoring in its strong benchmark performance and ability to cater to a wide range of user preferences and system needs.

 

In the fast-evolving SSD market, the Corsair MP700 Pro establishes itself as one of the most impressive consumer PCIe Gen5 SSDs we’ve evaluated. Its blend of high-speed performance, enhanced cooling design, and comprehensive feature set makes it an appealing choice for both everyday consumers and professionals seeking to maximize the potential of their Gen5 SSD slot.

 

Beijing Qianxing Jietong Technology Co., Ltd.
Sandy Yang/Global Strategy Director
WhatsApp / WeChat: +86 13426366826
Email: yangyd@qianxingdata.com
Website: www.qianxingdata.com/www.storagesserver.com

Business Focus:
ICT Product Distribution/System Integration & Services/Infrastructure Solutions
With 20+ years of IT distribution experience, we partner with leading global brands to deliver reliable products and professional services.
“Using Technology to Build an Intelligent World”Your Trusted ICT Product Service Provider!